Complete System 1 for Charging: 22.5 Watt  The ICP Sunsei solar charger SE-1500 provides a constant trickle charge to protect against battery drain in all Boats/RV. It also replaces the daily power consumption of your Boat/RV's 12V lighting systems and everyday appliances. It ensures peak performance and quick starts, even under cloudy conditions.

Complete System 2, 65 Watt Solar System: 65 Watt  Clean, quiet and reliable; the complete power independence solution for boats, yachts, large cruisers and sailboats; especially for those who want to avoid using generators. The Sunsei Plug’n’Play® solar is a backup power kit providing electricity during emergencies, power failures or engine-off periods to help run your small appliances such as radios, lights, TV, computers or alarm systems.

Complete System 3, 130 Watt Solar System: 130 Watt The Sunsei Solar Charger SE-8000 provides a renewable energy alternative to noisy and expensive fuel powered generators. It works with your large boat's electrical system to charge multiple batteries at once and power your 12V lighting systems, appliances, navigation system, electronics (TV, satellite, radio, computer) and more.  

Complete System 4, 390 Watt Solar System: 390 Watt  The Sunsei Solar Charger SE-24000 provides a renewable energy alternative to noisy and expensive fuel powered generators. It works with your large boat's electrical system to charge multiple batteries at once and power your 12V lighting systems, appliances, navigation system, electronics (TV, satellite, radio, computer) and more.  

Air-X Wind Generating Systems - 400 Watt Applications: Sailboats - Recreational boating Offshore beacons and remote monitoring equipment Oceanside homes & cabins Water pumping Battery charging Science & education projects

REC Solar

SCM 210 modules, made by REC Solar in Norway, are a series of high-quality solar modules designed to meet system demand for exceptional performance. Rigorous quality control is applied throughout the production process, from cells to modules. Sixty 6.14" square multicrystalline solar cells in each module are optimized for low light conditions and increased light absorption. The modules have an innovative design that eliminates shading effects in order to achieve maximum performance. A power output tolerance of ±3% guarantees minimum mismatch losses.

The comparatively low weight (48 lbs/22 kg) of the SCM 210 allows for quick and easy installation. The modules are equipped with USE-2 cables with MC4 locking connectors for problem-free inter-module connection

The SCM 210 series generates environmentally sound electricity. Cell and module production processes are designed to maximize recycling and reduce environmental impact. REC’s wafers, cells and modules are produced within Scandinavia and the company’s activities are therefore subject to very high standards of regulation regarding environmental issues.

The SCM 210 comes with a guarantee of 90% of rated power output for 10 years, and 80% of rated power output for 25 years.

Return to Top

Kyocera KD series modules have locking MC cables and black anodized frames for clean looking grid-tie installations. The 135 watt modules has 36 cells and can be used for grid tie or off-grid applications.

Kyocera T-series off-grid modules are ideal for charging storage batteries to power remote homes, recreational vehicles, telecommunications systems, and other consumer and commercial applications. Kyocera T-series modules have an industrial-grade junction box that allows the use of nominal 1/2" conduit fittings. They are available as 85-watt, 65-watt and 50-watt modules used for 12-volt battery charging. These modules are rated class 1, division 2 for hazardous locations.

All Kyocera modules feature extremely sturdy frames, tempered low-reflection glass covers, built-in bypass diodes and a 20-year power output warranty. UL Listed. Made in Japan or Mexico.

Return to Top

The AE series-HE photovoltaic modules provide cost-effective photovoltaic power for DC loads with moderate energy requirements. They charge batteries efficiently in virtually any climate. These modules are made with back-contact 18-20% efficient monocrystalline cells laminated behind tempered glass with aluminum frames offering the smallest footprint available for this size module.

They have an industrial-grade conduit-ready junction box on the back that has knockouts for two standard 1/2" conduit fittings. Typical commercial applications of these modules include remote telemetry, instrumentation systems, security sensors, signals, and land-based navigation aids. They have a 10-year power output warranty. Made in China.

Module	AE-120HE	AE-90HE	AE-60HE	AE-20HE
Peak power	120	90	60	20
Number of cells	36	32	36	34
Peak power voltage	18.9	17.6	18.9	17.3
Peak power current	6.34	5.12	3.20	1.18
Open circuit voltage	23.8	21.4	23.8	22.3
Short circuit Current	7.10	5.55	3.57	1.30
Length	42.60 (1082)	40.83 (1037)	31.10 (790)	23.03 (585)
Width	31.32(796)	20.75 (527)	21.10 (536)	11.42 (290)
Depth	1.38 (35)	1.38 (35)	1.38 (35)	1.02 (26)
Item code	011-08466	011-08463	011-08455	011-08438
Price	$930	$700	$400	$290

Return to Top

SolarWorld California was founded in March 2005 and expanded in July 2006 with the acquisition of Shell Solar Industries’ solar manufacturing facilities that had been operating in the USA since 1977. The factory, originally opened by ARCO Solar, later sold to Siemens Solar and then Shell, was purchased by SolarWorld in 2006.

Headquartered in Camarillo, California, SolarWorld California maintains ingot production facilities in Vancouver, WA and wafer, cell and module production facilities in the Camarillo facility. SolarWorld California modules are made in the USA ensuring high quality, performance and output. SolarWorld California is the largest manufacturer of solar modules in the U.S.

In 2007, SolarWorld acquired the Komatsu silicon wafer production facility in Hillsboro, Oregon, and is currently renovating the 480,000 square foot facility that will convert raw silicon into up to 500 MW worth of PV wafers and cells every year. The new Hillsboro facility will come on line in fall 2008.

These SolarWorld PV modules are designed for use in high-voltage grid-tie applications as well as in large industrial and off-grid applications for 24- or 48-volt battery charging. These modules use 72 five-inch semi-square single-crystalline cells in series behind tempered glass. They feature clear-anodized aluminum frames and a sealed junction box with bypass diodes and Multi-Contact locking connector output cables.

The Sunmodule is certified to the stringent safety and design requirements of UL1703 and IEC 61215. All US Sunmodules are currently produced in the ISO 9001:2000 certified Camarillo, California facility. SolarWorld offers end-of-life module recycling for all Sunmodules.

10-year 90% power warranty, 25-year 80% power warranty. UL Listed. CEC approved.

Return to Top

Global Solar’s SUNLINQ with PowerFLEX technology is a flexible, foldable and durable solar product that produces enough power to charge just about anything that is capable of being charged through a standard cigarette lighter adapter and has a power draw of less than the Sunlinq module being used. SUNLINQ is available in 6.5-watt, 12-watt and 25-watt foldable solar panels. These modules are great for hand-held devices like iPods, cell phones, PDAs and flashlights, but they are not suitable for charging notebook computers which require 50 to 150 watts.

The panels are made with PowerFLEX technology. Lightweight, flexible, weatherproof and durable CIGS (copper indium gallium diselenide) solar cells provide higher efficiency than other flexible solar cell technologies, including amorphous silicon. Each SUNLINQ comes with the five-piece accessory kit to make it easy to charge batteries and portable power packs, or run DC electronic devices. SP6.5 and SP12 have built-in charge controllers limiting output to 14.8 volts. 

Use the 7-amp charge controller below when using the SP25 to charge sealed lead acid batteries or to connect it directly to devices designed to run on 12-volt batteries. The SP25 can be connected directly to a Xantrex Powerpack without a charge controller. 1-year warranty.

Both P3 and SUNLINQ folding modules have output power cables with SAE 2-conductor trailer plugs. This 5-piece accessory cable set contains adaptors for male and female cigarette lighter plugs, battery clips, an 8-foot extension cable and 2.5mm coaxial barrel plug. These accessories facilitate auto battery charging, using modules to power cigarette lighter adapters (CLA) for cell phones, iPods, radios and CD players.

SUNLINQ modules have a regulated output and can be directly connected to CLA from portable devices designed to plug into auto cigarette lighter outlets. P3 modules are unregulated and require a charge controller to safely operate without a battery. The charge controller can be used between the P3 modules and power supplies designed to run on 12-volt battery power, even if a battery is not connected. 1-year warranty.

The 2.5mm barrel plug allows these modules to plug into Xantrex Powerpacks for charging. See page 97 for Xantrex Powerpacks.

The PowerBank battery pack can be used to charge small electronics with a variety of voltages. The large assortment of connector plugs and cables available with the PowerBank makes it an easy way to charge your small electronics while on the go. It has an internal lithium-ion battery. This battery pack was intended to work with the 6.5W and 12W SUNLINQ only.

System 1 for Charging: The ICP Sunsei solar charger SE-1500 provides a constant trickle charge to protect against battery drain in all Boats/RV. It also replaces the daily power consumption of your Boat/RV's 12V lighting systems and everyday appliances. It ensures peak performance and quick starts, even under cloudy conditions.

Features:

• Provides immediate trickle-charge when exposed to daylight, even on cloudy days

• Patent-pending touch-action indicator lets you know your panel is charging

• Plug’n’Play® for quick connections & instant expansion

• Cigarette lighter adaptor, battery clamps, terminal rings and connector wires included

• Connect multiple panels in seconds without tools or rewiring

• Impact resistant tempered glass

• Fully weatherproofed

• Shipping and Handling $35.00

Solar Panel Regular Price: $199.00       Intro Price: $150.00

 

4 Amp Charge Controller: $27.00      Intro Price: $25.00

System 2, 65 Watt Solar System: Clean, quiet and reliable; the complete power independence solution for boats, yachts, large cruisers and sailboats; especially for those who want to avoid using generators. The Sunsei Plug’n’Play® solar is a backup power kit providing electricity during emergencies, power failures or engine-off periods to help run your small appliances such as radios, lights, TV, computers or alarm systems.

Features:

• Exclusive LED display charging level indicator

• Plug’n’Play award winning technology corners for easy installation and expandability

• High efficiency crystalline cells

• Aerodynamic heat-dissipating aluminum frame

• Impact resistant tempered glass                                 

• Fully weatherproofed

• 20 Year warranty on power production

• 6 stainless steel mounting brackets and screws

• 10 ft (3 m) 12-gauge (2 mm) power cable

• Shipping and Handling $50.00

Solar Panel Regular Price: $899.00               Intro Price: $710.00

25 Amp Charge Controller: $80.00                 Intro Price: $75.00

 

10 Amp Charge Controller: $38.00                 Intro Price: $33.00

 

Return to Top

System 3, 130 Watt Solar System: The Sunsei Solar Charger SE-8000 provides a renewable energy alternative to noisy and expensive fuel powered generators. It works with your large boat's electrical system to charge multiple batteries at once and power your 12V lighting systems, appliances, navigation system, electronics (TV, satellite, radio, computer) and more.

Features:

• Aerodynamic design specially engineered to reduce drag and withstand high-vibration, mobile applications

• Blinking indicator lets you know your panel is charging

• Charges multiple batteries at once

• Plug’n’Play® for quick connections & instant expansion

• Works with your boat's electrical system

• Fully weatherproofed

• Connect multiple panels in seconds without tools or rewiring

• Connector wires and mounting hardware included  

• Shipping and Handling $50.00

Solar Panel Regular Price: $1,199.99           Intro Price: $985.00

25 Amp Charge Controller: $80.00              Intro Price: $75.00

Return to Top

System 4, 390 Watt Solar System: The Sunsei Solar Charger SE-24000 provides a renewable energy alternative to noisy and expensive fuel powered generators. It works with your large boat's electrical system to charge multiple batteries at once and power your 12V lighting systems, appliances, navigation system, electronics (TV, satellite, radio, computer) and more.  

Features:

• Sunsei CC25000 Charge Controller (25 ampere) - Overcharge protection for solar systems up to 400 watts. Intelligent PWM charge control ensures batteries reach max capacity. Built-in LED indicator instantly displays charging status

• Aerodynamic design specially engineered to reduce drag and withstand high-vibration, mobile applications

• Blinking indicator lets you know your panel is charging

• Charges multiple batteries at once

• Plug’n’Play® for quick connections & instant expansion

• Works with your boat's electrical system

• Fully weatherproofed

• Connect multiple panels in seconds without tools or rewiring

• Connector wires and mounting hardware included

• Shipping and Handling $50.00

Includes Sunsei CC25000 Charge Controller

Regular Price: $3,395.00                      Intro Price: $2,940.00

Return to Top

Solar  Vent        S & H 24.00   Intro Price:  $112.00

Return to Top

Return to Top

25 Amp Charge Controller      

Reg. Price: $80.00 

Intro Price: $75.00

              

Return to Top

10 Amp Charge Controller        

Reg. Price: $38.00  

Intro Price: $33.00

            

4 Amp Charge Controller

Reg. Price: $27.00

Intro Price: $25.00

    Shipping and Handling on above Charge Controllers $19.00 each

Air-X Wind Generating Systems

Applications: Sailboats - Recreational boating Offshore beacons and remote monitoring equipment Oceanside homes & cabins Water pumping Battery charging Science & education projects

Introducing the latest evolution in small wind turbines. The AIR-X builds upon what has made AIR the world's #1 selling small wind turbine with new technology previously found only in today's state-of-the-art mega-watt-class wind turbines. All of these features are primarily found within the body of the turbine. The new microprocessor-based speed control results in increased performance, improved battery charging capability and the reduction of “flutter” noise. The turbine’s smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise. Furthermore, a new series of carbon-reinforced blades with a modified pitch angle further increases power production. 

Improved battery charging: Previous AIR designs required 300-400 amp-hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR-X’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action.  Only when the battery has dropped below its voltage set point will it startup and resume charging. The Benefit: Extended battery life, no overcharging. 
 
Improved resistance to the effects of the sun, wind and water: AIR-X marine has vastly improved body preparation and applications of the marine paint during manufacture, ensuring durable powdercoat protection of the body and internal components, even when subjected to the most extreme sun, wind and weather conditions. 

Features: 

• Unprecedented 3 YEAR WARRANTY

• Simple rooftop installation; no tower necessary

• Carbon Fiber Composite Blades

• Aircraft quality aluminum alloy castings

• Exclusive brush-less neodymium cubic curve alternator

• Sophisticated internal battery charge regulator

• Maintenance-free - Only two moving parts

• Exclusive Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus extending bearing life and reducing noise.

• High Wind Safe Mode - Automatically slows turbine in potentially damaging winds and reduces noise.

     Specifications

• Rotor Diameter: 46" (1.14 meters)

• Weight: 13 lbs (6 kg)

• Start up wind speed: 7 mph (3 m/s)

• Voltage: 12 & 24 VDC (36/48 VDC available soon)

• Output: 400 watts at 28 mph (12.5 m/s)  

• Shipping and Handling $47.00

Price $879.00

Return to Top

9 Foot Air Marine Alum. Pole Set (Includes Mast & 2 Stays Only)  S & H $ 24.00  $208.00

 

Marine Tower Hardware Kit (For 9 Foot Pole Set) S & H $24.00   $193.00

Return to Top